Description

• Blocks most UV radiation and protects workers in adjacent areas from welding flash
• Barrier for dust, smoke, flying debris, and sparks and spatter from welding
• Reduces noise
• Temperature Range - Between 0°F and +150°F.
• UV Absorber - Strips will not discolor
• UV Rated for welding applications
• CFM and NFPA-701 flame retardant certifications
• Need other colors, click here? 

Ratings and Certifications

• Made with formula compound to absorb and protect from hazardous UV rays
• CFM and NFPA-701 flame retardant certifications
• Exceeds OSHA requirements
• 2 Year warranty on manufacturing defects - Strips

WARNING: Tinted Transparent vinyl welding strip curtains are not intended as a substitute for normal eye protection for close or long-term viewing. The user must wear protective eyewear suitable for the application.

Lead Time

• Ships in 2-3 work days
• Ships UPS or FedEx. You can also specify your shipping account

What is the spacing on the holes for the strips?
The holes are on 2" centers as shown below. The below strip is an 8" wide strip but all of the strips have the same spacing so that the strips fit studded hardware systems.

Are the height of the strips measured from the hole or the top of the strip?
The height is measured from the top of the strip to the bottom of the strip. The holes are located .75" down from the top of the strip.

How do you cut the strips in the field?
You use a utility knife and a straight edge to keep the cut straight.

Are the strips ready to hang and already punched?
There are two options from this form. If you order bulk roll then the strips will come without any perforation or holes so you will be responsible for cutting the strips to your desired lengths and punching holes. If you order it as pre-cut and punched then yes the strips are shipped out and ready to be hung right out of the box.