Opaque Curtains - 18oz

• Vinyl coated polyester reinforced with scrim
• NFPA fire retardant, CFM fire retardant
• Finished edges for clean crisp appearance
• Double or triple hems used where needed for longevity
• Ideal for temperatures going as low as -20° F
• All colors are the same price
• 18 oz = .020″ thick, 2.0 oz. per square foot

Clear Vision Panel - 20mil 

• Clear double polished PVC
• NFPA fire retardant, CFM fire retardant
• Outdoor rated
• Finished edges for clean, crisp appearance
• Double or triple hems used where needed for longevity
• Ideal for temperatures going as low as 10° F to 140° F
• 20 mil = 20mil thick, 1.98 oz. per square foot

Mesh Vision Panel - 12oz mil 

• 12oz vinyl mesh
• NFPA fire retardant, CFM fire retardant
• Outdoor rated
• Double or triple hems used where needed for longevity
• Ideal for temperatures going as low as -20° F

WARNING - Cold Crack

Different materials have different low temperature ratings. These are very important, so please read carefully.

Clear - 20mil Clear Vision Panels - Ideal for temperatures going as low as 10° F or -12° C and above. If folded below these temperatures or blown around in the wind, the vinyl will likely crack. If your environment is likely to have temperatures below this range, it is best to use only opaque solid color curtains.

Opaque Solid Color - 18oz - Ideal for temperatures going as low as -20° F or -28° C. If folded below these temperatures or blown around in the wind, the vinyl will likely crack. If your environment is likely to have temperatures below this range, then our curtains will likely crack.

Width

• Measure the distance that you are trying to cover.
  • Add 5% to that dimension and input it into the width field of this form.
  • The extra 5% gives you proper drape for your curtain.

Height

• Measure the distance from the floor to the mounting point.
  • Take that dimension and subtract 3 inches and input it into the height field of this form.
    • If you are not using hardware then no need to subtract the 3"
    • If you want the floor sweep option, also subtract the 3". This will allow the floor sweep to lay slightly on the floor while the main curtain is just off of the floor.

Need More Help? Watch This

Common Questions

• Standard curtains have approximately 3.75 to 1″ of a gap from the bottom of the track to the top of the curtain.

What are the dimensions of the track?

• Yes, the track is made to be field cut on site using a hack saw or sawzall.

• The track is modular in design and will arrive in pieces that have a simple bolt together design.

• The track should be supported approximately every 5' with a track support. The farther apart the track supports, the greater the deflection. If you have a relatively light weight curtain then you could space the supports out to about 8' apart. You will receive enough track supports with your order to achieve this 5' spacing.

• Yes. This is called a flush mount install and is very common. Simply drill through the middle of the track and use a small wood screw, bolt, Tek screw...ect into your structure. Space the holes about every 3-5'.

• It is very easy. All of the components simply fit into each other and connect with set screws. The installation is very intuitive. If you have any difficulty simply call or email us and we will walk you through the process.

• The track is Hot-dip galvanizing (HDG) which is often used to protect steel from corrosion in some of the harshest environments imaginable, yet it provides maintenance-free longevity for decades. The corrosion resistance of hot-dip galvanizing varies according to its surroundings but generally corrodes at a rate of 1/30 of bare steel in the same environment.

Key Benefits

• Less expensive than rigid walls
• Can be taken down quickly when not needed
• Can be repurposed in other areas
• Quick to roll out of the way when not in use
• Easy to clean with the slick surface of vinyl
• Lifetime warranty on all hardware and 5-year defect warranty on curtains

Many Layout Options

AKON can supply just about any layout you can think of. Below are some common styles. They can be single-sided, double-sided, triple-sided, four-sided, or multiple straights to create complete enclosures. You simply inform AKON about your desired design, and we will have it fabricated exactly as you need it. For customized layouts, sketch your design and upload it using our online RFQ form. See the button below.

Lead Time

• Ships in 7-10 work days
• Ships UPS or FedEx. You can also specify your shipping account

Warranty

• Curtains - 5 year warranty on manufacturing defects
• Hardware - Lifetime warranty on manufacturing defects